Tag Archives: hypervisor

Proxmox storage with TrueNAS iSCSI volumes

By | | , , , , , , , , , , , , , , , , , ,
7 Comments

A few weeks ago, I decided to wipe clean my entire lab setup running Proxmox 6.2. I wanted to connect the latest version of Proxmox VE 8.0-2 using iSCSI LUNs from the TrueNAS® system I have with me. I thought it would be fun to have the configuration steps and the process documented. This is my journal on how to provision a TrueNAS® CORE iSCSI LUN to Proxmox storage. This iSCSI volume in Proxmox is where the VMs will be installed into.

Here is a simplified network diagram of my setup but it will be expanded to a Proxmox cluster in the future with the shared storage.

Proxmox and TrueNAS network setup

Preparing the iSCSI LUN provisioning

The iSCSI LUN (logical unit number) is provisioned as a logical disk volume to the Proxmox node, where the initiator-target relationship and connection are established.

This part assumes that a zvol has been created from the zpool. At the same time, the IQN (iSCSI Qualified Name) should be known to the TrueNAS® storage as it establishes the connection between Proxmox (iSCSI initiator) and TrueNAS (iSCSI target).

The IQN for Proxmox can be found by viewing the content of the /etc/iscsi/initiatorname.iscsi within the Proxmox shell as shown in the screenshot below.

Where to find the Proxmox iSCSI IQN

The green box shows the IQN number of the Proxmox node that starts with iqn.year-month.com.domain:generated-hostname. This will be used during the iSCSI target portal configuration in the TrueNAS® webGUI.

Continue reading →

Praying to the hypervisor God

By | | , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
1 Comment

I was reading a great article by Frank Denneman about storage intelligence moving up the stack. It was pretty much in line with what I have been observing in the past 18 months or so, about the storage pendulum having swung back to DAS (direct attached storage). To be more precise, the DAS form factor I am referring to are physical server hardware that houses many disk drives.

Like it or not, the hypervisor has become the center of the universe in the IT space. VMware has become the indomitable force in the hypervisor technology, with Microsoft Hyper-V playing catch-up. The seismic shift of these 2 hypervisor technologies are leading storage vendors to place them on to the altar and revering them as deities. The others, with the likes of Xen and KVM, and to lesser extent Solaris Containers aren’t really worth mentioning.

This shift, as the pendulum swings from networked storage back to internal “direct-attached” storage are dictated by 4 main technology factors:

  • The x86 server architecture
  • Software-defined
  • Scale-out architecture
  • Flash-based storage technology

Anyone remember Thumper? Not the Disney character from the Bambi movie!

thumper-bambi-cartoon-character

When the SunFire X4500 (aka Thumper) was first released in (intermission: checking Wiki for the right year) in 2006, I felt that significant wound inflicted in the networked storage industry. Instead of the usual 4-8 hard disk drives in the all the industry servers at the time, the X4500 4U chassis housed 48 hard disk drives. The design and architecture were so astounding to me, I even went and bought a 1U SunFire X4150 for my personal server collection. Such was my adoration for Sun’s technology at the time.

Continue reading →

Why VAAI?

By | | ,
Leave a comment

This is Part 2 of my previous blog about VAAI (vStorage API for Array Integration) with more details about VAAI. VAAI offloads some of the I/O related functions to the VAAI-enable storage array, hence giving the hypervisor more compute and memory resource to do it other functions. And the storage array, upon receiving the VAAI command, will execute whatever that is required of it.

Why is VAAI important? What does it do that makes it so useful and important to the hypervisor?

VAAI is about a set of new SCSI commands. And there are 3 important ones:

  • WRITE-SAME
  • XSET
  • ATS

What exactly do these SCSI commands do?

WRITE-SAME is a SCSI command that instructs the storage array to zeroes the virtual VMDK disks or VMFS LUNs. This usually happens when guest OS require a brand new set of virtual disks and initializing the virtual disks is required. In the past (before VAAI), the hypervisor has to repetitively send 0s to the storage to perform the disks zeroing. As shown in the diagram below, you can see that each zero operation is sent from the hypervisor to the storage.

This back-and-forth of sending 0s and acknowledgments between the hypervisor and the storage is not efficient. With VAAI, the command WRITE-SAME  is sent from the hypervisor to the storage array and the storage array will do the zeroing on the disks and LUNs. The hypervisor will not intervene with the process until it gets and acknowledgment of its completion. See diagram below of how VAAI helps in bulk-zeroing of disks and LUNs in the storage array.

The animated GIFs are the taken from Luke Reed’s blog, a fantastic read.

The second VAAI SCSI command is XSET and it performs hardware accelerated full copy. This command is also known as  XCOPY and it offloads the process of copying the blocks of data that makeup a VMDK file. Such copying operations occur when the hypervisor is doing things like VM cloning, Storage vMotion or VM creation from templates (bulk copying to create many similar VMs in one go).

Again with the courtesy of Luke Reed’s animated GIFs, the diagram below shows a full copy without VAAI

and after implementing VAAI, where the full, bulk copy operations is offloaded to the storage array to execute.

The third and last SCSI command of VAAI is ATS or hardware-assisted locking. ATS stands for Atomic, Test and Set and the command allow the hypervisor to lock only the required blocks rather than the entire LUN.

Without VAAI, the entire LUN temporarily could be locked by the numerous VMFS operations of one single hypervisor and this prevents other hypervisors from accessing the shared LUNs. The ATS API offloads lock management from the host to the storage array and keeps the LUN available by locking only required blocks, not the entire VMFS file system. Please see the pleasing diagrams below of

(without VAAI ATS)

(with VAAI ATS)

And if you want to see the VAAI Hardware Accelerated Full Copy (aka XSET) in action, here’s a little video showing how it is done in an EMC environment.

The primary significance and noticeable benefit is definitely performance. The secondary benefit, though not so obvious, is allowing VMware and its hypervisor to scale because it does not get bogged down by some of the I/O functions that it is not meant to do.

There were some new additions in vSphere 5.0 for VAAI. From its FAQ, it listed in ESX5.0, support for NAS Hardware Acceleration is included with support for the following primitives:

  • Full File Clone – Like the Full Copy VAAI primitive provided for block arrays, this Full File Clone primitive enables virtual disks to be cloned by the NAS device.
  • Native Snapshot Support – Allows creation of virtual machine snapshots to be offloaded the array.
  • Extended Statistics – Enables visibility to space usage on NAS datastores and is useful for Thin Provisioning.
  • Reserve Space – Enables creation of thick virtual disk files on NAS.

So, there you have it folks. Why VAAI? Here’s why.

VAAI to go!

By | | ,
1 Comment

First of all, let me apologize. I am guilty of not updating my blogs as regularly as I did in the past. Things got a bit crazy after Christmas and I had to juggle several things that demand more of my attention but I am confident things will sort itself out soon enough.

Today’s topic is about VMware’s VAAI (vSphere vStorage API for Array Integration). This feature was announced more than 3 years ago but was only introduced in vSphere 4.1 July 2010 and now with newer enhancements in the latest release of vSphere 5.0.

What is this VAAI and what does this mean from a storage perspective?

When VMware came into prominence in version 3.0/3.5 time, the whole world revolved around the ESX hypervisor. It tried to do everything on its own, in its own proprietary nature. Given its nascent existence then, ESX had to do what it had to do and control everything with its hypervisor universe. Yes, it was a good move then and it did what it was supposed to do. This was back when server virtualization was in its infancy, and resources requirements were less demanding.

Hence when VMware wants to initialize VMs, or create VMDK files on the datastore, or creating clones or snapshots, or even executing VMotion and Storage VMotion, it tends to execute it at the hypervisor level. For example, when creating virtual disks with VMFS, most of the commands to initialization of the disks were done at the VMFS level. Zeroing the virtual disks would mean sending zeroing commands to the actual physical disks on the shared storage. And this would go on back and forth, taxing the CPU cycles and memory on the hypervisor layer, and sending wasteful and unnecessary zeroes over the network to the storage array. This was very inefficient, wasteful and degrades the performance tremendously, especially at the hypervisor layer (compute and memory).

There are also other operations such as virtual disks locking that locks up the entire LUN that housed several datastores. Again, not good.

But VMware took off like a rocket, and quickly established itself as a Tier 1, enterprise server virtualization solution addressing the highest demands of the enterprise. It is also defining the future of Cloud Computing, building exorbitant requirements as it pushes forward. And VMware began to realize that if the hypervisor is to scale, it needs to leave the I/O operations to the “experts”, and the “experts” here being the respective storage array itself.

So, in version 4.1, VAAI (vStorage API for Array Integration) was introduced as an API suite, following 3 other earlier APIs – vStorage API for Site Recovery Manager (SRM), vStorage API for Data Protection and vStorage API for Multipathing.

In a nutshell, as I have mentioned before, VAAI offloads I/O and storage related operations to the VAAI-capable storage array (leave it to the experts) as shown in the diagram below:

 

Of course, the storage vendors themselves has to rework their array OS layer to integrate with the VAAI API. You can say that the VAAI are “hooks” that enhances the storage connectivity and communications with vSphere’s hypervisor. But then again, if you look at it from the other angle, vSphere need the storage vendors more in order for its universe to scale. Good thing VMware has a big, big market share. Imagine if there are no takers for the VAAI APIs. That would be a strange predicament instead.

What is the big deal that we get from VAAI? The significant and noticeable benefit is increase performance. By offloading the I/O functionality and operations to the storage array itself, the hypervisor and the compute and memory resource are not bogged down, resulting in higher performance and better response time to serve its VMs and other VM operations.

I am going off to another meeting and I shall write of VAAI in more details later. Until the next entry, adios and have a great year ahead.