Let’s smoke the storage peace pipe

NVMe (Non-Volatile Memory Express) is upon us. And in the next 2-3 years, we will see a slew of new storage solutions and technology based on NVMe.

Just a few days ago, The Register released an article “Seventeen hopefuls fight for the NVMe Fabric array crown“, and it was timely. I, for one, cannot be more excited about the development and advancement of NVMe and the upcoming NVMeF (NVMe over Fabrics).

This is it. This is the one that will end the wars of DAS, NAS and SAN and unite the warring factions between server-based SAN (the sexy name differentiating old DAS and new DAS) and the networked storage of SAN and NAS. There will be PEACE.

Remember this?

nutanix-nosan-buntingNutanix popularized the “No SAN” movement which later led to VMware VSAN and other server-based SAN solutions, hyperconverged techs such as PernixData (acquired by Nutanix), DataCore, EMC ScaleIO and also operated in hyperscalers – the likes of Facebook and Google. The hyperconverged solutions and the server-based SAN lines blurred of storage but still, they are not the usual networked storage architectures of SAN and NAS. I blogged about this, mentioning about how the pendulum has swung back to favour DAS, or to put it more appropriately, server-based SAN. There was always a “Great Divide” between the 2 modes of storage architectures. Continue reading

Really? Disk is Dead? From Violin?

A catchy email from one of the forums I subscribed to, caught my attention. It goes something like “…Grateful … Disk is Dead“. Here the blog from Kevin Doherty, a Senior Account Manager at Violin Memory.

Coming from Violin Memory, this is pretty obvious because they have an agenda against HDDs. They don’t use any disks at all …. in any form factor. They use VIMMs (Violin Inline Memory Modules), something no vendor in the industry use today.


I recalled my blog in 2012, titled “Violin pulling the strings“. It came up here in South Asia with much fan fare, lots of razzmatazz and there was plenty of excitement. I was even invited to their product training at Ingram Micro in Singapore and met their early SE, Mike Thompson. Mike is still there I believe, but the EMC veteran in Singapore whom I mentioned in my previous blog, left almost a year later after joining. So was the ex-Sun, General Manager of Violin Memory in Singapore.

Continue reading

The reverse wars – DAS vs NAS vs SAN

It has been quite an interesting 2 decades.

In the beginning (starting in the early to mid-90s), SAN (Storage Area Network) was the dominant architecture. DAS (Direct Attached Storage) was on the wane as the channel-like throughput of Fibre Channel protocol coupled by the million-device addressing of FC obliterated parallel SCSI, which was only able to handle 16 devices and throughput up to 80 (later on 160 and 320) MB/sec.

NAS, defined by CIFS/SMB and NFS protocols – was happily chugging along the 100 Mbit/sec network, and occasionally getting sucked into the arguments about why SAN was better than NAS. I was already heavily dipped into NFS, because I was pretty much a SunOS/Solaris bigot back then.

When I joined NetApp in Malaysia in 2000, that NAS-SAN wars were going on, waiting for me. NetApp (or Network Appliance as it was known then) was trying to grow beyond its dot-com roots, into the enterprise space and guys like EMC and HDS were frequently trying to put NetApp down.

It’s a toy”  was the most common jibe I got in regular engagements until EMC suddenly decided to attack Network Appliance directly with their EMC CLARiiON IP4700. EMC guys would fondly remember this as the “NetApp killer“. Continue reading

MASSive, Impressive, Agile, TEGILE

Ah, my first blog after Storage Field Day 6!

It was a fantastic week and I only got to fathom the sensations and effects of the trip after my return from San Jose, California last week. Many thanks to Stephen Foskett (@sfoskett), Tom Hollingsworth (@networkingnerd) and Claire Chaplais (@cchaplais) of Gestalt IT for inviting me over for that wonderful trip 2 weeks’ ago. Tegile was one of the companies I had the privilege to visit and savour.

In a world of utterly confusing messaging about Flash Storage, I was eager to find out what makes Tegile tick at the Storage Field Day session. Yes, I loved Tegile and the campus visit was very nice. I was also very impressed that they have more than 700 customers and over a thousand systems shipped, all within 2 years since they came out of stealth in 2012. However, I was more interested in the essence of Tegile and what makes them stand out.

I have been a long time admirer of ZFS (Zettabyte File System). I have been a practitioner myself and I also studied the file system architecture and data structure some years back, when NetApp and Sun were involved in a lawsuit. A lot of have changed since then and I am very pleased to see Tegile doing great things with ZFS.

Tegile’s architecture is called IntelliFlash. Here’s a look at the overview of the IntelliFlash architecture:

Tegile IntelliFlash Architecture

So, what stands out for Tegile? I deduce that there are 3 important technology components that defines Tegile IntelliFlash ™ Operating System.

  • MASS (Metadata Accelerator Storage System)
  • Media Management
  • Inline Compression and Inline Deduplication

What is MASS? Tegile has patented MASS as an architecture that allows optimized data path to the file system metadata.

Often a typical file system metadata are stored together with the data. This results in a less optimized data access because both the data and metadata are given the same priority. However, Tegile’s MASS writes and stores the filesystem metadata in very high speed, low latency DRAM and Flash SSD. The filesystem metadata probably includes some very fine grained and intimate details about the mapping of blocks and pages to the respective capacity Flash SSDs and the mechanical HDDs. (Note: I made an educated guess here and I would be happy if someone corrected me)

Going a bit deeper, the DRAM in the Tegile hybrid storage array is used as a L1 Read Cache, while Flash SSDs are used as a L2 Read and Write Cache. Tegile takes further consideration that the Flash SSDs used for this caching purpose are different from the denser and higher capacity Flash SSDs used for storing data. These Flash SSDs for caching are obviously the faster, lower latency type of eMLCs and in the future, might be replaced by PCIe Flash optimized by NVMe.

Tegile DRAM-Flash Caching

This approach gives absolute priority, and near-instant access to the filesystem’s metadata, making the Tegile data access incredibly fast and efficient.

Tegile’s Media Management capabilities excite me. This is because it treats every single Flash SSD in the storage array with very precise organization of 3 types of data patterns.

  1. Write caching, which is high I/O is focused on a small segment of the drive
  2. Metadata caching, which has both Read and Write I/O  is targeted to a slight larger segment of the drive
  3. Data is laid out on the rest of the capacity of the drive

Drilling deeper, the write caching (in item 1 above) high I/O writes are targeted at the drive segment’s range which is over-provisioned for greater efficiency and care. At the same time, the garbage collection(GC) of this segment is handled by the respective drive’s controller. This is important because the controller will be performing the GC function without inducing unnecessary latency to the storage array processing cycles, giving further boost to Tegile’s already awesome prowess.

In addition to that, IntelliFlash ™ aligns every block and every page exactly to each segment and each page boundary of the drives. This reduces block and page segmentation, and thereby reduces issues with file locality and free blocks locality. It also automatically adjust its block and page alignments to different drive types and models. Therefore, I believe, it would know how to align itself to a 512-bytes or a 520-bytes sector drives.

The Media Management function also has advanced cell care. The wear-leveling takes on a newer level of advancement where how the efficient organization of blocks and pages to the drives reduces additional and often unnecessary erase and rewrites. Furthermore, the use of Inline Compression and Inline Deduplication also reduces the number of writes to drives media, increasing their longevity.

Tegile Inline Compression and Deduplication

Compression and deduplication are 2 very important technology features in almost all flash arrays. Likewise, these 2 technologies are crucial in the performance of Tegile storage systems. They are both inline i.e – Inline Compression and Inline Deduplication, and therefore both are boosted by the multi-core CPUs as well as the fast DRAM memory.

I don’t have the secret sauce formula of how Tegile designed their inline compression and deduplication. But there’s a very good article of how Tegile viewed their method of data reduction for compression and deduplication. Check out their blog here.

The metadata of data access of each and every customer is probably feeding into their Intellicare, a cloud-based customer care program. Intellicare is another a strong differentiator in Tegile’s offering.

Oh, did I mentioned they are unified storage as well with both SAN and NAS, including SMB 3.0 support?

I left Tegile that afternoon on November 5th feeling happy. I was pleased to catch up with Narayan Venkat, my old friend from NetApp, who is now their Chief Marketing Officer. I was equally pleased to see Tegile advancing ZFS further than the others I have known. With so much technological advancement and more coming, the world is their oyster.

No Flash in the pan

The storage networking market now is teeming with flash solutions. Consumers are probably sick to their stomach getting a better insight which flash solution they should be considering. There are so much hype, fuzz and buzz and like a swarm of bees, in the chaos of the moment, there is actually a calm and discerning pattern slowly, but surely, emerging. Storage networking guys would probably know this thing well, but for the benefit of the other readers, how we view flash (and other solid state storage) becomes clear with the picture below: Flash performance gap

(picture courtesy of  http://electronicdesign.com/memory/evolution-solid-state-storage-enterprise-servers)

Right at the top, we have the CPU/Memory complex (labelled as Processor). Our applications, albeit bytes and pieces of them, run in this CPU/Memory complex.

Therefore, we can see Pattern #1 showing up. Continue reading

Signs of things to come?

I wanted to sign off early tonight but an article in ComputerWorld caught my tired eyes. It was titled “EMC to put hardware into servers, VMs into storage” and after I read it, I couldn’t help but to juxtapose the articles with what I said earlier in my blogs, here and here.

It is very interesting to note that “EMC runs vSphere directly on the storage controllers and then uses vMotion to migrate VMs from application servers onto the storage array, ..” since the storage boxes have enough compute power to run Virtual Machines on the storage. Traditionally and widely accepted, VMs should be running on servers. Contrary to beliefs, EMC has already demonstrated this running of VMs capability on their VNX, Isilon and Symmetrix.

And soon, with EMC’s Project Lightning (announced at EMC World in May 2011), they will be introducing server side PCIe-based SSDs, ala Fusion-IO. This is different from the NetApp PAM/FlashCache PCIe-based card, which sits on their arrays, not on hosts or servers. And it is also very interesting to note that this EMC server-side PCIe Flash SSD card will become a bridge to EMC’s FAST (Fully Automated Storage Tiering) architecture, enabling it to place hot, warm and cold data strategically on different storage tiers of the applications on VMware’s VMs (now on either the server or the storage),  perhaps using vMotion as a data mover on top of the “specialized” link created by the server-side EMC PCIe card.

This also blurs the line between the servers and storage and creates a virtual architecture between servers and storage, because what used to be distinct data border of the servers is now being melded into the EMC storage array, virtually.

2 red alerts are flagging in my brain right now.

  1. The “bridge” has just linked the server back to the storage, after years of talking about networked storage. The server is ONE again with the storage. Doesn’t that look to you like a server with plenty of storage? It has come a full cycle. But more interesting and what I am eager to see is what more is this “bridge” capable of when it comes to data management. vMotion might be the first of many new “protocol” breeds to enhance data management and mobility with this “bridge”. I am salivating right now of this massive potential.
  2. What else can EMC do with the VMware API? This capability I am writing right now is made possible by EMC tweaking VMware’s API to maximize much, much more. As the VMware vStorage API is continually being enhanced, the potential is again, very massive and could change the entire landscape of cloud computing and subsequently, the entire IT landscape. This is another Pavlov’s dog moment (see figures below as part of my satirical joke on myself)


Sorry, the diagram below is not related to what my blog entry is. Just my way of describing myself right now. 😉

I am extremely impressed with what EMC is doing. A lot of smarts and thinking go into this and this is definitely signs of things to come. The server and the storage are “merging again”. Think of it as Borg assimilation in Star Trek.

Resistance is futile!