Did Cloud Kill LTFS?

I like LTFS (Linear Tape File System). I was hoping it would take off but it has not. And looking at its future, its significance is becoming less and less relevant. I look if Cloud has been a factor in the possible demise of LTFS in the next few years.

What is LTFS?

In a nutshell, Linear Tape File System makes LTO tapes look like a disk with a file system. It takes a tape and divides it into 2 partitions:

  • Index Partition (XML Index Schema with file names, metadata and attributes details)
  • Data Partition (where the data resides)

Diagram from https://www.snia.org/sites/default/orig/SDC2011/presentations/tuesday/DavidPease_LinearTape_File_System.pdf

It has a File System module which is implemented in supported OS of Unix/Linux, MacOS and Windows. And the mounted file system “tape partition” shows up as a drive or device.

Assassination attempts

There were many attempts to kill off tapes and so far, none has been successful.

Among the “tape-killer” technologies, I think the most prominent one is the VTL (Virtual Tape Library). There were many VTLs I encountered during my days in mid-2000s. NetApp had Alacritus and EMC had Clariion Disk Libraries. There were also IBM ProtecTIER, FalconStor VTL (which is still selling today) among others and Sepaton (read in reverse is “No Tapes’). Sepaton was acquired by Hitachi Data Systems several years back. Continue reading

Sexy HPC storage is all the rage

HPC is sexy

There is no denying it. HPC is sexy. HPC Storage is just as sexy.

Looking at the latest buzz from Super Computing Conference 2018 which happened in Dallas 2 weeks ago, the number of storage related vendors participating was staggering. Panasas, Weka.io, Excelero, BeeGFS, are the ones that I know because I got friends posting their highlights. Then there are the perennial vendors like IBM, Dell, HPE, NetApp, Huawei, Supermicro, and so many more. A quick check on the SC18 website showed that there were 391 exhibitors on the floor.

And this is driven by the unrelentless demand for higher and higher performance of computing, and along with it, the demands for faster and faster storage performance. Commercialization of Artificial Intelligence (AI), Deep Learning (DL) and newer applications and workloads together with the traditional HPC workloads are driving these ever increasing requirements. However, most enterprise storage platforms were not designed to meet the demands of these new generation of applications and workloads, as many have been led to believe. Why so?

I had a couple of conversations with a few well known vendors around the topic of HPC Storage. And several responses thrown back were to put Flash and NVMe to solve the high demands of HPC storage performance. In my mind, these responses were too trivial, too irresponsible. So I wanted to write this blog to share my views on HPC storage, and not just about its performance.

The HPC lines are blurring

I picked up this video (below) a few days ago. It was insideHPC Rich Brueckner interview with Dr. Goh Eng Lim, HPE CTO and renowned HPC expert about the convergence of both traditional and commercial HPC applications and workloads.

I liked the conversation in the video because it addressed the 2 different approaches. And I welcomed Dr. Goh’s invitation to the Commercial HPC community to work with the Traditional HPC vendors to help push the envelope towards Exascale SuperComputing.

Continue reading

Is Pure Play Storage good?

I post storage and cloud related articles to my unofficial SNIA Malaysia Facebook community (you are welcomed to join) every day. It is a community I started over 9 years ago, and there are active live banters of the posts of the day. Casual, personal were the original reasons why I started the community on Facebook rather than on LinkedIn, and I have been curating it religiously for the longest time.

The Big 5 of Storage (it was Big 6 before this)

Looking back 8-9 years ago, the storage vendor landscape of today has not changed much. The Big 5 hegemony is still there, still dominating the Gartner Magic Quadrant for Enterprise and Mid-end Arrays, and is still there in the All-Flash quadrant as well, albeit the presence of Pure Storage in that market.

The Big 5 of today – Dell EMC, NetApp, HPE, IBM and Hitachi Vantara – were the Big 6 of 2009-2010, consisting of EMC, NetApp, Dell, HP, IBM and Hitachi Data Systems. The All-Flash, or Gartner calls it Solid State Arrays (SSA) market was still an afterthought, and Pure Storage was just founded. Pure Storage did not appear in my radar until 2 years later when I blogged about Pure Storage’s presence in the market.

Here’s a look at the Gartner Magic Quadrant for 2010:

We see Pure Play Storage vendors in the likes of EMC, NetApp, Hitachi Data Systems (before they adopted the UCP into their foray), 3PAR, Compellent, Pillar Data Systems, BlueArc, Xiotech, Nexsan, DDN and Infortrend. And when we compare that to the 2017 Magic Quadrant (I have not seen the 2018 one yet) below:

Continue reading

DellEMC SC progressing well

[Preamble: I was a delegate of Storage Field Day 14. My expenses, travel and accommodation were paid for by GestaltIT, the organizer and I was not obligated to blog or promote the technologies presented at this event. The content of this blog is of my own opinions and views]

I haven’t had a preview of the Compellent technology for a long time. My buddies at Impact Business Solutions were the first to introduce the Compellent technology called Data Progression to the local Malaysian market and I was invited to a preview back then. Around the same time, I also recalled another rather similar preview invitation by PTC Singapore for the 3PAR technology called Adaptive Provisioning (it is called Adaptive Optimization now).

Storage tiering was on the rise in the 2009-2010 years. Both Compellent and 3PAR were neck and neck leading the conversation and mind share of storage tiering, and IBM easyTIER and EMC FAST (Fully Automated Storage Tiering) were nowhere to be seen or heard. Vividly, the Compellent Data Progression technology was much more elegant compared to the 3PAR technology. While both intelligent storage tiering technologies were equally good, I took that the 3PAR founders were ex-Sun Microsystems folks, and Unix folks sucked at UX. In this case, Compellent’s Data Progression was a definitely a leg up better than 3PAR.

History aside, this week I have the chance to get a new preview of the Compellent technology again. Compellent was now rebranded as the SC series and was positioned as the mid-range storage arrays of DellEMC. And together with the other Storage Field Day 14 delegates, I have the pleasure to experience the latest SC Data Progression technology update, as well their latest SC All-Flash.

In Data Progression, one interesting feature which caught my attention was the RAID Tiering. This was a dynamic auto expand and auto contract set of RAID tiersRAID 10 and RAID 5/6 in the Fast Tier and RAID 5/6 in the Lower Tier. RAID 10, RAID 5 and RAID 6 on the same set of drives (including SSDs), and depending on the “hotness” of the data, the location of the data blocks switched between the several RAID tiers in the Fast Tier. Over a longer period, the data blocks would relocate transparently to the Capacity Tier from the Fast Tier.

The Data Progression technology is extremely efficient. The movement of the data between the RAID Tiers and between the Performance/Capacity Tiers are in pages instead of blocks, making the write penalty and bandwidth to a negligible minimum.

The Storage Field Day 14 delegates were also privileged to be the first to get into the deep dive of the new All-Flash SC, just days of the announcement of the All-Flash SC. The All Flash SC redefines and refines the Data Progression to the next level. Among the new optimization, NAND Flash in the SC (both SLCs and MLCs, read-intensive and write-intensive) set the Data Progression default page size from 2MB to 512KB. These smaller 512KB pages enabled reduced bandwidth for tiering between the write-intensive and the read-intensive tier.

I didn’t get the latest SC family photos yet, but I managed to grab a screenshot of the announcement from The Register of the new DellEMC SC Series.

I was very encouraged with the DellEMC Midrange Storage presentation. Besides giving us a fantastic deep dive about the DellEMC SC All-Flash Storage, I was also very impressed by the candid and straightforward attitude of the team, led by their VP of Product Management, Pierluca Chiodelli. An EMC veteran, he was taking up the hard questions onslaught by the SFD14 delegate like a pro. His team’s demeanour was critical in instilling confidence and trust in how the bloggers and the analysts viewed Dell EMC merger, and how the SC and the Unity series would pan out in the technology roadmap.

Unlike the fiasco I went through with the DellEMC Forum 2017 in Malaysia, where I was disturbed with 3 calls in 3 consecutive days by DellEMC Malaysia, I was left with a profound respect for this DellEMC Storage team. They strongly supported their position within the DellEMC storage universe, and imparted their confidence in their technology solution in the marketplace.

Without a doubt, in my point of view, this DellEMC Mid-Range Storage team was the best I have enjoyed in Storage Field Day 14. Thank you.

Solid in the Fire

December 22 2015: I kept this blog in draft for 6 months. Now I am releasing it as NetApp acquires Solidfire.

真金不怕紅爐火

The above is an old Chinese adage which means “True Gold fears no Fire“. That is how I would describe my revisited view and assessment of SolidFire, a high performance All-Flash array vendor which is starting to make its presence felt in South Asia.

I first blogged about SolidFire 3 years ago, and I have been following the company closely as more and more All-Flash array players entered the market over the 3 years. Many rode on the hype and momentum of flash storage, and as a result, muddied and convoluted the storage infrastructure market understanding. It seems to me spin marketing ruled the day and users could not make a difference between vendor A and vendor B, and C and D, and so on….

I have been often asked, which is the best All-Flash array today. I have always hesitated to say which is the best because there aren’t much to say, except for 2-3 well entrenched vendors. Pure Storage and EMC XtremIO come to mind but the one that had stayed under the enterprise storage radar was SolidFire, until now.

SolidFire Logo

Continue reading

Don’t get too drunk on Hyper Converged

I hate the fact that I am bursting the big bubble brewing about Hyper Convergence (HC). I urge all to look past the hot air and hype frenzy that are going on, because in the end, the HC platforms have to be aligned and congruent to the organization’s data architecture and business plans.

The announcement of Gartner’s latest Magic Quadrant on Integrated Systems (read hyper convergence) has put Nutanix as the leader of the pack as of August 2015. Clearly, many of us get caught up because it is the “greatest feeling in the world”. However, this faux feeling is not reality because there are many factors that made the pack leaders in the Magic Quadrant (MQ).

Gartner MQ Integrated Systems Aug 2015

First of all, the MQ is about market perception. There is no doubt that the pack leaders in the Leaders Quadrant have earned their right to be there. Each company’s revenue, market share, gross margin, company’s profitability have helped put each as leaders in the pack. However, it is also measured by branding, marketing, market perception and acceptance and other intangible factors.

Secondly, VMware EVO: Rail has split the market when EMC has 3 HC solutions in VCE, ScaleIO and EVO: Rail. Cisco wanted to do their own HC piece in Whiptail (between the 2014 MQ and 2015 MQ reports), and closed down Whiptail when their new CEO came on board. NetApp chose EVO: Rail and also has the ever popular FlexPod. That is why you see that in this latest MQ report, NetApp and Cisco are interpreted independently whereas in last year’s report, it was Cisco/NetApp. Market forces changed, and perception changed.  Continue reading

The reverse wars – DAS vs NAS vs SAN

It has been quite an interesting 2 decades.

In the beginning (starting in the early to mid-90s), SAN (Storage Area Network) was the dominant architecture. DAS (Direct Attached Storage) was on the wane as the channel-like throughput of Fibre Channel protocol coupled by the million-device addressing of FC obliterated parallel SCSI, which was only able to handle 16 devices and throughput up to 80 (later on 160 and 320) MB/sec.

NAS, defined by CIFS/SMB and NFS protocols – was happily chugging along the 100 Mbit/sec network, and occasionally getting sucked into the arguments about why SAN was better than NAS. I was already heavily dipped into NFS, because I was pretty much a SunOS/Solaris bigot back then.

When I joined NetApp in Malaysia in 2000, that NAS-SAN wars were going on, waiting for me. NetApp (or Network Appliance as it was known then) was trying to grow beyond its dot-com roots, into the enterprise space and guys like EMC and HDS were frequently trying to put NetApp down.

It’s a toy”  was the most common jibe I got in regular engagements until EMC suddenly decided to attack Network Appliance directly with their EMC CLARiiON IP4700. EMC guys would fondly remember this as the “NetApp killer“. Continue reading

Why demote archived data access?

We are all familiar with the concept of data archiving. Passive data gets archived from production storage and are migrated to a slower and often, cheaper storage medium such tapes or SATA disks. Hence the terms nearline and offline data are created. With that, IT constantly reminds users that the archived data is infrequently accessed, and therefore, they have to accept the slower access to passive, archived data.

The business conditions have certainly changed, because the need for data to be 100% online is becoming more relevant. The new competitive nature of businesses dictates that data must be at the fingertips, because speed and agility are the new competitive advantage. Often the total amount of data, production and archived data, is into hundred of TBs, even into PetaBytes!

The industries I am familiar with – Oil & Gas, and Media & Entertainment – are facing this situation. These industries have a deluge of files, and unstructured data in its archive, and much of it dormant, inactive and sitting on old tapes of a bygone era. Yet, these files and unstructured data have the most potential to be explored, mined and analyzed to realize its value to the organization. In short, the archived data and files must be democratized!

The flip side is, when the archived files and unstructured data are coupled with a slow access interface or unreliable storage infrastructure, the value of archived data is downgraded because of the aggravated interaction between access and applications and business requirements. How would organizations value archived data more if the access path to the archived data is so damn hard???!!!

An interesting solution fell upon my lap some months ago, and putting A and B together (A + B), I believe the access path to archived data can be unbelievably of high performance, simple, transparent and most importantly, remove the BLOODY PAIN of FILE AND DATA MIGRATION!  For storage administrators and engineers familiar with data migration, especially if the size of the migration is into hundreds of TBs or even PBs, you know what I mean!

I have known this solution for some time now, because I have been avidly following its development after its founders left NetApp following their Spinnaker venture to start Avere Systems.

avere_220

Continue reading

Hail Hydra!

The last of the Storage Field Day 6 on November 7th took me and the other delegates to NEC. There was an obvious, yet eerie silence among everyone about this visit. NEC? Are you kidding me?

NEC isn’t exactly THE exciting storage company in the Silicon Valley, yet I was pleasantly surprised with their HydraStorprowess. It is indeed quite a beast, with published numbers of backup throughput of 4PB/hour, and scales to 100PB of capacity. Most impressive indeed, and HydraStor deserves this blogger’s honourable architectural dissection.

HydraStor is NEC’s grid-based, scale-out storage platform with an object storage backend. The technology, powered by the DynamicStor ™ software, a distributed file system laid over the HydraStor grid architecture. At the same time, it has the DataRedux™ technology that provides the global in-line deduplication as the HydraStor ingests data for data protection, replication, archiving and WORM purposes. It is a massive data consolidation platform, storing gazillion loads of data (100PB you say?) for short-term and long-term retention and recovery.

The architecture is indeed solid, and its data availability goes beyond traditional RAID-level resiliency. HydraStor employs their proprietary erasure coding, called Distributed Resilient Data™. The resiliency knob can be configured to withstand 6 concurrent disks or nodes failure, but by default configured with a resiliency level of 3.

We can quickly deduce that DynamicStor™, DataRedux™ and Distributed Resilient Data™ are the technology pillars of HydraStor. How do they work, and how do they work together?

Let’s look a bit deeper into the HydraStor architecture.

HydraStor is made up of 2 types of nodes:

  • Accelerator Nodes
  • Storage Nodes

The Accelerator Nodes (AN) are the access nodes. They interface with the HydraStor front end, which could be CIFS, NFS or OST (Open Storage Technology). The AN nodes chunks the in-coming data and performs in-line deduplication at a very high speed. It can reach speed of 300TB/hour, which is blazingly fast!

The AN nodes also runs DynamicStor™, handling the performance heavy-lifting portion of HydraStor. The chunked data from the AN nodes are then passed on to the Storage Nodes (SN), where they are further “deduped in-line” to determined if the chunks are unique or not. It is a two-step inline deduplication process. Below is a diagram showing the ANs built above the SNs in the HydraStor grid architecture.

NEC AN & SN grid architecture

 

The HydraStor grid architecture is also a very scalable architecture, allow the dynamic scale-in and scale-out of both ANs and SNs. AN nodes and SN nodes can be added or removed into the system, auto-configuring and auto-optimizing while everything stays online. This capability further strengthens the reliability and the resiliency of the HydraStor.

NEC Hydrastor dynamic topology

Moving on to DataRedux™. DataRedux™ is HydraStor’s global in-line data deduplication technology. It performs dedupe at the sub-file level, with variable length window. This is performed at the AN nodes and the SN nodes level,chunking and creating unique hash values. All unique chunks are further compressed with a modified LZ compression algorithm, shrinking the data to its optimized footprint on the disk storage. To maintain the global in-line deduplication, the hash table is available across the HydraStor cluster.

NEC Deduplication & Compression

The unique data chunk resulting from deduplication and compression are then written to disks using the configured Distributed Resilient Data™ (DRD) algorithm, at its set resiliency level.

At the junction of DRD, with erasure coding parity, the data is broken up into multiples of fragments and assigned a parity to a grouping of fragments. If the resiliency level is set to 3 (the default), the data is broken into 12 pieces, 9 data fragments + 3 parity fragments. The 3 parity fragments corresponds to the resiliency level of 3. See diagram below of the 12 fragments spread across a group of selected disks in the storage pool of the Storage Nodes.

NEC DRD erasure coding on Storage Nodes

 

If the HydraStor experiences a failure in the disks or nodes, and has resulted in the loss of a fragment or fragments, the DRD self-healing function will auto-rebuild and auto-reconfigure the recovered fragments in another set of disks, maintaining the level of 3 parities.

The resiliency level, as mentioned earlier, can be set up to 6, boosting the HydraStor survival factor of 6 disks or nodes failure in the grid. See below of how the autonomous DRD recovery works:

NEC Autonomous Data recovery

Despite lacking the razzle dazzle of most Silicon Valley storage startups and upstarts, credit be given where credit is due. NEC HydraStor is indeed a strong show stopper.

However, in a market that is as fickle as storage, deduplication solutions such as HydraStor, EMC Data Domain, and HP StoreOnce, are being superceded by Copy Data Management technology, touted by Actifio. It was rumoured that EMC restructured their entire BURA (Backup Recovery Archive) division to DPAD (Data Protection and Availability Division) to go after the burgeoning copy data management market.

It would be good if NEC can take notice and turn their HydraStor “supertanker” towards the Copy Data Management market. That would be something special to savour.

P/S: NEC. Sorry about the title. I just couldn’t resist it 😉

Praying to the hypervisor God

I was reading a great article by Frank Denneman about storage intelligence moving up the stack. It was pretty much in line with what I have been observing in the past 18 months or so, about the storage pendulum having swung back to DAS (direct attached storage). To be more precise, the DAS form factor I am referring to are physical server hardware that houses many disk drives.

Like it or not, the hypervisor has become the center of the universe in the IT space. VMware has become the indomitable force in the hypervisor technology, with Microsoft Hyper-V playing catch-up. The seismic shift of these 2 hypervisor technologies are leading storage vendors to place them on to the altar and revering them as deities. The others, with the likes of Xen and KVM, and to lesser extent Solaris Containers aren’t really worth mentioning.

This shift, as the pendulum swings from networked storage back to internal “direct-attached” storage are dictated by 4 main technology factors:

  • The x86 server architecture
  • Software-defined
  • Scale-out architecture
  • Flash-based storage technology

Anyone remember Thumper? Not the Disney character from the Bambi movie!

thumper-bambi-cartoon-character

When the SunFire X4500 (aka Thumper) was first released in (intermission: checking Wiki for the right year) in 2006, I felt that significant wound inflicted in the networked storage industry. Instead of the usual 4-8 hard disk drives in the all the industry servers at the time, the X4500 4U chassis housed 48 hard disk drives. The design and architecture were so astounding to me, I even went and bought a 1U SunFire X4150 for my personal server collection. Such was my adoration for Sun’s technology at the time.

Continue reading